3d elocone nuts
3d nuts
3d nuts
elocone table

Availability: 

  • Most of Elocone nuts are available in stock. 
  • Stock orders:
    • Items that are available in stock are shown in the dropdown menu under "Part Number" section on the right side of this page. 
    • All stock orders come with standard threads (for non galvanized anchor rods ONLY). 
    • Stock orders are shipped in 3 to 5 days (this will be confirmed after the time of purchase). 
    • Shipping only available Monday to Thursday.
  • Special orders:
    • Items that are missing from the dropdown menu (on the right side of the page) are not available in stock. You need to place a special order for these items. 
    • Galvanized anchor rods require special Elocone nuts that have oversized threads (OT) which are not always available in stock. Some part numbers are kept in stock. For unlisted parts, you will still need to place a special order.
    • Special orders are shipped in 4 to 6 weeks. 
    • For special orders, please contact us at elocone.cbus@canamgroupinc.com

Description: 

Elocone nuts are special elongated nuts that can be used to correct problems encountered when the anchor rods are installed without enough projection above the concrete foundation.

These nuts are fabricated by machining a piece of high strength steel to two different sections. The upper section is similar to a standard nut and will bear on the column base or washer plate. The lower section has a smaller smooth diameter and is able to fit an oversized hole of the base plate to screw on enough threads of the anchor rod installed with a short projection. 

In order to develop the tension capacity of an anchor made of steel with a tensile strength of 1,035 MPa (150 ksi), the Elocone nuts must be fastened to the anchor rod for a length equal to the diameter of the rod.

Elocone extended nuts dimensions: 

Elocone nuts are machined pieces with a standard nut head and an elongated lower part that can be screwed to anchor rods within the thickness of the base plate. Dimensions can change without notice. In addition, the plate washers for Elocone nuts are sold separately.

References: 

Elocone Nuts

$41.00
$41.00
Sold out
All sales are final.

No tax exemptions are accepted.

Elocone nuts and Elocone plate washers are sold separately.

Standard Elocone nuts come with standard threads. Note that galvanized anchors require special Elocone nuts that have oversized threads which are not available in stock. The production of special Elocone nuts takes 4 to 6 weeks. For special orders, please contact us at elocone.cbus@canamgroupinc.com

Standard Elocone plate washers are designed according to the minimum recommendations of the AISC Design Guide 1. It is the responsibility of the Engineer of Record to design the Elocone plate washers according to the applicable loads.

All Elocone nuts and Elocone plate washers are unfinished steel (no paint or galvanized finishes are currently available).